When it comes to hauling gear in a side-by-side, Can-Am Maverick R owners tend to fall into two camps. Some want a clean, enclosed trunk and never think about it again. Others want flexibility — the ability to organize tools, food, recovery gear, and personal items in a way that actually makes sense once you’re miles into a ride.
If you’re in the second camp, chances are you’ve already looked at (or are running) the Milwaukee PACKOUT™ system. And once you go down that road, the next question becomes obvious: what’s the best Packout Mounting Plate for a Can-Am Maverick R that actually gets ridden hard?
That’s exactly where Rad Haul comes in.
We break down why Packout Mounting Plates have become such a popular storage solution for UTVs, what to look for in a quality plate, and why Rad Haul’s upcoming 2024+ Can-Am Maverick R Packout Mounting Plate was designed very differently from the steel options already on the market.
What You’ll Find in This Guide
- What is a Packout Mounting Plate
- Why Maverick R owners choose Milwaukee PACKOUT
- The common issues with steel Packout plates
- Why material choice matters on the trail
- How this plate is designed specifically for the 2024+ Can-Am Maverick R
- How PACKOUT gear can be configured for different riding needs
- Why the Milwaukee PACKOUT system works so well off-road
- Who this Packout Mounting Plate is built for
- What’s coming next from Rad Haul
- Frequently asked questions
What Is a Packout Mounting Plate?
A Packout Mounting Plate is the foundation that allows Milwaukee PACKOUT™ toolboxes, organizers, and coolers to lock directly onto a vehicle. Instead of relying on straps, bungees, or loose tie-downs, the plate interfaces with Milwaukee’s integrated locking cleats so your gear physically locks into place.
For UTVs, that means:
- No shifting cargo
- No rattling toolboxes
- No wasted bed space
- Fast removal when you need to grab a box or cooler
When paired with Milwaukee PACKOUT accessories like organizers, totes, or coolers, a mounting plate turns open cargo space into a modular, purpose-built hauling system.
Why Maverick R Owners Are Choosing Milwaukee PACKOUT Over Traditional Trunks
The Milwaukee PACKOUT™ system wasn’t designed specifically for off-road vehicles, but its modular design makes it a natural fit.
Riders who’ve switched from traditional trunk systems consistently point to a few advantages:
- Separation of gear: Tools stay separate from first aid. Food stays separate from parts.
- Grab-and-go convenience: Pull one box without unloading everything else.
- Modularity: Reconfigure your setup based on the ride, not the vehicle.
- Security without straps: Boxes lock directly to the plate.
This flexibility is why you see PACKOUT systems used not just by tradespeople, but by guides, racers, and long-distance trail riders who need fast access to specific gear.
A Milwaukee PACKOUT Organizer for tools, a dedicated medical kit, and a PACKOUT Cooler for food and drinks can all live on the same plate — locked in, organized, and easy to access.
The Problem With Most Steel Packout Plates
Most Packout plates on the market today are made from powder-coated steel. On paper, that sounds great — steel is strong, rigid, and familiar. In real-world off-road use, though, steel plates can introduce some issues.
Common complaints from riders include:
- Flex or wobble when the plate isn’t fully supported
- Limited mounting points that allow corners to lift under load
- Vibration transfer directly into toolboxes and coolers
- Chipped powder coat leading to rust over time
- Heavy weight added high in the vehicle
Some riders have even resorted to drilling additional holes or adding eye bolts just to keep plates planted — something no one wants to do on a “bolt-on” accessory.
That feedback played a major role in how Rad Haul approached its Maverick R Packout Mounting Plate.
Why Material Choice Matters on the Trail
Rad Haul’s Can-Am Maverick R Packout Mounting Plate is CNC machined from ½-inch High Molecular Weight (HMW) polyethylene, not metal.
That decision was intentional.
Advantages of HMW Poly for Off-Road Use
- Impact resistant: Absorbs hits instead of transferring shock into your gear
- Lightweight: Strong without unnecessary mass
- No rust, no corrosion: Nothing to chip, flake, or oxidize
- Gear-friendly: Won’t scratch or damage mounted boxes
- Vibration damping: Helps protect tools, electronics, and coolers on rough terrain
HMW poly is commonly used in industrial, agricultural, and off-road applications specifically because it handles repeated impacts and harsh environments better than rigid metals.
On a UTV that sees dunes, rocks, whoops, and high-speed trail riding, that matters.
Designed Specifically for the 2024+ Can-Am Maverick R
This Packout Mounting Plate isn’t a universal plate adapted to fit the Can-Am Maverick R. It’s CAD designed specifically for the 2024+ Maverick R platform, ensuring proper fitment and efficient use of space.
Two Mounting Locations, One Plate
- Maverick R bed
- OEM spare tire carrier
The plate itself remains the same. The only difference is the included hardware kit, depending on where you choose to mount it. No drilling is required in either configuration.
Mounted flat, the plate preserves as much usable space as possible while providing a solid foundation for PACKOUT gear.
Built for Real-World PACKOUT Configurations
The Rad Haul Packout Mounting Plate for the 2024+ Can-Am Maverick R is designed to support the full flexibility of the Milwaukee PACKOUT system. Instead of locking you into a single layout, the plate provides multiple PACKOUT mounting sections that allow riders to configure their storage around the gear they actually carry.
Whether you’re running coolers, toolboxes, organizers, or a mix of PACKOUT accessories, the plate accommodates a wide range of stacking and layout options. Larger boxes, smaller organizers, and combination setups can be arranged to suit different ride styles, cargo needs, and trip lengths without modifying the plate itself.
Integrated L-track mounting locations are built directly into the plate, giving riders additional options for securing gear when needed. These click-in points make it easy to add Rad Haul straps or accessories while keeping factory bed space usable and avoiding permanent modifications.
From tools and recovery equipment to food, first-aid supplies, and trail essentials, the system is designed to keep PACKOUT gear locked in place and organized—without relying on loose straps, bungees, or improvised tie-downs.
Why Milwaukee PACKOUT Works So Well Off-Road
Milwaukee PACKOUT™ boxes are built from impact-resistant polymers, use metal-reinforced locking points, and feature weather-resistant seals on many organizers. Weight capacities are designed for demanding environments, not light-duty storage.
That durability is exactly why PACKOUT has become popular beyond the jobsite.
When paired with a mounting plate that complements — rather than fights — that design, the result is a system that stays quiet, secure, and usable even when the terrain gets rough.
Built for the Way You Ride
Rad Haul didn’t build this plate for garage queens. It was designed for riders who actually use their Maverick R the way it was intended.
- Dune riding at high speeds and whooped trails
- Rock crawling in places like Moab
- Long trail ride days where access and organization matter
- Adventure rides where gear needs to stay protected
The goal wasn’t just to hold PACKOUT boxes — it was to keep them stable, reduce wear on your gear, and make hauling feel intentional instead of improvised.
Coming Soon from Rad Haul
The Rad Haul Packout Mounting Plate for the 2024+ Can-Am Maverick R is launching soon and made right here in the USA.
If you’re already invested in Milwaukee PACKOUT Accessories — or you’ve been looking for a better way to organize your Can-Am Maverick R without committing to a fixed trunk — this system is built for exactly that use case.
More details, photos, and availability will be announced soon at RadHaul.com. Follow us on social media for news, updates, and more.
Frequently Asked Questions
Q: What is a Packout Mounting Plate used for on a UTV?
A: A Packout Mounting Plate allows Milwaukee PACKOUT™ toolboxes, organizers, and coolers to lock directly onto a UTV. It eliminates the need for straps or bungees and keeps gear secure during aggressive riding.
Q: Will Milwaukee Packout boxes stay locked in on rough trails?
A: Yes. PACKOUT boxes use a mechanical locking cleat system designed to stay engaged during transport. When paired with a properly mounted plate, they remain secure even during hard riding, jumps, and rough terrain.
Q: Is HMW strong enough for a Packout Mounting Plate?
A: High Molecular Weight (HMW) polyethylene is extremely impact resistant and commonly used in demanding industrial and off-road applications. It absorbs impacts better than rigid metal and does not rust or corrode.
Q: Does the Rad Haul Packout Mounting Plate require drilling?
A: No. The plate is designed to bolt on using existing mounting points, whether installed in the bed or on the OEM spare tire carrier.
Q: What Milwaukee Packout gear fits on the plate?
A: The plate supports a wide range of Milwaukee PACKOUT Accessories, including PACKOUT organizers, toolboxes, and the Milwaukee PACKOUT Cooler. Multiple configurations are possible depending on box size and stacking.
Q: Can I reconfigure my Packout setup later?
A: Absolutely. That’s one of the biggest advantages of the PACKOUT system. Boxes can be rearranged, swapped, or removed based on the ride or task without changing the plate itself.
Q: Is this plate only for the Maverick R?
A: The first Rad Haul Packout Mounting Plate launch is specifically for the 2024+ Can-Am Maverick R, designed around that platform’s bed and OEM spare tire carrier. More UTV’s to come in the future.